The 3-in-1 system designed for the future

Hyperion X9 pro offers the very best of 3D technology, cephalometric projections and a wide range of 2D examinations.

Configurable and modular

  • Image technology and quality
  • Optimal user experience
  • Comfort ed ergonomia
  • Comfort and ergonomics

2D/3D high-definition imaging and cutting-edge technology for a complete, upgradable, and small-sized platform. Hyperion X9 pro meets every diagnostic requirement by easily integrating into the work flow and guaranteeing maximum comfort for both patient and operator. SuperHD quality images for unfailingly perfect diagnoses thanks to easy and completely guided procedures. Full accessibility and user-friendliness with the innovative full-touch control panel and fast Face To Face positioning which guarantees maximum comfort to both patient and operator. The wide scalability and modularity of Hyperion X9 pro allows to change the setting according to your needs, upgrading from a basic to an advanced version in a simple and cost-effective manner.

SuperHD diagnosis

MultiFOV and high resolution: the best 3D images for all your radiology needs.

  • MultiFOV
  • 3 protocols each FOV
  • Dentistry and otorhinolaryngology
  • Implantology, orthodontia, gnathology, endodontics
  • Ear, nose, throat and sinuses

A wide range of FOV to meet any clinical requirement: from implantology to the measurement of airway volumes, from endodontics to oral surgery. All the FOV, from the smallest to the largest, are available in three execution modes to suit every need. Just a few steps are required to identify the most suitable setting according to the selected anatomical region. The innovative selection between the three dedicated modes allows the operator to carry out examinations based on the actual diagnostic needs and with extreme ease:

QuickScan Faster low-dose scans for post-surgery follow-ups and macro-structure analyses.

Standard mode Primary diagnosis and treatment planning. The best balance between dose and quality.

SuperHD Exceptional level of detail, without compromise. Ideal for the analysis of macro-structures.

Smart CB3D.

Reach a new level

  • New upgraded generator
  • High-sensitivity 3D sensor
  • 360-degree scan

The very best of technological evolution for 3D diagnostics in your clinic. Hyperion X9 pro is equipped with an upgraded generator designed to give you the best results in the shortest time possible and with a 3D sensor that delivers high-quality images with minimum irradiated dose. This next-generation technology, combined with optimised scanning protocols, makes it possible to achieve an extraordinary 68μm resolution.

Perfection in details.

FAST 360-DEGREE SCAN The main advantage of 360-degree scanning is a considerable reduction of artifacts. Hyperion X9 pro combines this type of acquisition with extremely fast execution times. In just 14" it is indeed possible to carry out complete high-resolution examinations at low X-ray doses: excellent quality, detailed particulars, fast diagnosis.

UPGRADED GENERATOR The constant potential generator, equipped with a focal spot of just 0.5mm, optimises exposure thanks to the pulsed emission technology thereby ensuring the best results with the lowest irradiated dose.

WIDE 3D CONTROL PANEL The technologically-advanced 3D control panel stands out for its exceptional sensitivity which allows for extremely detailed examinations. Volumes of complete dentition and upper airways in SuperHD quality for accurate diagnoses at all times.

Detector technology CMOS
Pixel size 100 μm
Dynamic range 14 bit (16,383 grey levels)
Signal to noise ratio Minimum 74dB – Typical 86dB
Detector height 148 mm 223 mm
Image pixel matrix max: 1470 x 2562 max: 2155 x 2935
Maximum image file size 8 MB (single image) 14 MB
Typical scan time 6 s – 12.3 s 3.3 s - 9 s
Theoretical image resolution PAN: 6.3 (pixel pitch of 80μm)
BITEWING: 7.5 lp/mm (pixel pitch of 70μm)
CEPH: 5.6 (pixel 90 μm)
Image format TIFF 16 bit, DICOM
Patient alignment Servo-assisted: 4 laser guides
Detector technology Amorphous silicon - CsI with direct deposition
Dynamic range 16 bit (65,535 grey levels)
Typical scan time 14.4 s
Rotation 360°/180°
Image voxel size Minimum 75 μm Minimum 68 μm
Field of view, diameter x height 108 x 80 mm 108 x 50 mm
Available FOV sizes (Øxh) 6x6 - 8x6 - 8x8 - 10x6 - 10x8 6x6 - 8x6 - 8x8 - 10x6 - 10x8
10x10 - 13x8 - 13x10 - 13x16
4x4 - 7x6 (eXtended Functionality)
Typical image size 495 MB 820 MB
Minimum scan time 6.4 s 3.6 s
Typical X-ray exposure time 1.6 s (Low-dose QuikScan) - 8.0 s (SuperHD Mode)
Patient alignment Servo-assisted: Scout View method
Image format Exclusive iRYS and DICOM 3.0 software
Minimum render times for CB3D data 15 s on average On average, real-time for FOV XF 4x4 QuickScan
Voltage | Frequency 115 - 240 Vac, ± 10% single phase | 50 / 60 Hz ± 2 Hz
Maximum current temporary peak absorption 20A at 115V, 12A at 240V
Current absorption in standby mode 25 Watt
Minimum available work space requirement (L x D) 1390 x 1140 mm 1390 x 1800 mm
Package dimensions (HxLxD) 1515 x 1750 x 670 mm (basic machine);
360 x 530 x 1030 mm (teleradiographic arm)
2-speed motorized column, adjustable height 1660 - 2450 mm
Weight 155 Kg – 342 lbs 175 Kg – 386 lbs
Notes Wall or floor support, free standing base available.
Accessible for patients on wheelchair
Generator type Constant potential (DC)
Frequency 100 -180 kHz
X-ray emission type Continuous or Pulsed
Anode voltage 2D: 60 – 85 kV | CB3D: 90 kV (Pulsed Mode)
Anode current 2 – 16 mA
Exposure time 1 s – 18 s
Focal spot 0.5 mm (IEC 60336)
Exposure control Automatic. Morphology Recognition Technology (MRT)
Compensation of spine absorption Automatic (modularity of X-ray beam kV)
mA and kV configuration Modulated in real time during X-ray exposure,
automatically or manually selectable in discrete increments.
Maximum continuous anode input power 42W (1:20 at 85kV/10mA)
Inherent filtration 2D: >2.5 mm Al eq. (at 85 kV) | 3D: 6.5 mm Al eq. (at 90 kV)
Integrated X-ray shielding behind receptor In compliance with IEC60601-1-3


Scroll to Top